Prof. Jozef Keckes' list of publications:

Fritz-Popovski, G., Sosada-Ludwikowska, F., Köck, A., Keckes, J., Maier, G.A. Study of CuO Nanowire Growth on Different Copper Surfaces, Scientific Reports, 9 (2019) 807.

Gruber, D.P., Kiefer, D., Rössler, R., Beckmann, F., Tkadletz, M., Klünsner, T., Czettl, C., Keckes, J., Gibmeier, J. 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification, International Journal of Refractory Metals and Hard Materials 82 (2019) 121-128.

Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez-Martin, F., Keckes, J., Stark, A., Ebner, R. In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite, Journal of Materials Science, 54 (2019) 9197-9212.

Gindl-Altmutter, W., Köhnke, J., Unterweger, C., Gierlinger, N., Keckes, J., Zalesak, J., Rojas, O.J. Lignin-based multiwall carbon nanotubes, Composites Part A: Applied Science and Manufacturing, 121(2019) 175-179.

Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J.F., Lessiak, M., Köpf, A., Weißenbacher, R., Keckes, J., Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy, Nanoscale, 11 (2019) 7986-7995.

Saghaeian, F., Keckes, J., Zechner, J., Woehlert, S., Schreiber, K.A., Pfaff, H., Walter, J. Fabrication of MEMS based structures for characterization of thin metal films by nanoindentation technique, EMAP 2018 – 2018 20th International Conference on Electronic Materials and Packaging (2019) art. no. 8660918.

Ghosh, P., Kormout, K.S., Todt, J., Lienert, U., Keckes, J., Pippan, R. An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (2019) 794-806.

Zápražný, Z., Korytár, D., Jergel, M., Halahovets, Y., Kotlár, M., Maťko, I., Hagara, J., Šiffalovič, P., Kečkéš, J., Majková, E. Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics, International Journal of Advanced Manufacturing Technology (2019), https://doi.org/10.1007/s00170-019-03392-z  

Gruber, J. Todt, N. Wöhrl, J. Zalesak, M. Tkadletz, A. Kubec, S. Niese, M. Burghammer, M. Rosenthal, H. Sternschulte, M. J. Pfeinfenberger, B. Sartory, J. Keckes, Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics, Carbon, 144 (2019) 666-674.

Ferrarisa, F. Warchomicka, C. Ramskogler, M. Tortello, A. Cochis, A. Scalia, G. Gautier di Confiengo, J. Keckes, L. Rimondini, S. Spriano, Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2, Journal of Materials Processing Technology 266 (2019) 518-529.

Sarac, F. Spieckermann, A. Rezvan, C. Gammer, L. Krämer, J. T. Kim, J. Keckes, R. Pippan, J.,Eckert, Annealing-assisted high-pressure torsion in Zr55Cu30Al10Ni5 metallic glass, Journal of Alloys and Compounds (2019).

Schalk, N., Tkadletz, M., Terziyska, V.L., Deluca, M., Letofsky-Papst, I., Keckes, J., Mitterer, C. Evolution of microstructure and mechanical properties of a graded TiAlON thin film investigated by cross-sectional characterization techniques (2019) Surface and Coatings Technology, 359, pp. 155-161.

Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C., Keckes, J. Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design (2019) Materials and Design, 161, pp. 80-85.

Ghosh, P., Kormout, K.S., Lienert, U., Keckes, J., Pippan, R. Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel – An in situ synchrotron investigation (2018) Acta Materialia, 160, pp. 22-33.

Reisinger, S., Kozeschnik, E., Ressel, G., Keckes, J., Stark, A., Marsoner, S., Ebner, R. Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling (2018) Materials and Design, 155, pp. 475-484.

Saghaeian, F., Keckes, J., Schreiber, K.A., Mittereder, T. Design and development of MEMS-based structures for in-situ characterization of thermo-mechanical behaviour of thin metal films (2018) Microelectronics Reliability, 88-90, pp. 829-834.

Müller, U., Gindl-Altmutter, W., Keckes, J. How softwood tree branches are attached to stems: hierarchical extension of Shigo’s stem–branch model (2018) Trees – Structure and Function, 32 (4), pp. 1113-1121.

Jergel, M., Halahovets, Y., Maťko, I., Korytár, D., Zápražný, Z., Hagara, J., Nádaždy, P., Šiffalovič, P., Kečkéš, J., Majková, E. Finishing of Ge nanomachined surfaces for X-ray crystal optics (2018) International Journal of Advanced Manufacturing Technology, 96 (9-12), pp. 3603-3617.

Korsunsky, A.M., Salvati, E., Lunt, A.G.J., Sui, T., Mughal, M.Z., Daniel, R., Keckes, J., Bemporad, E., Sebastiani, M. Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis (2018) Materials and Design, 145, pp. 55-64.

Kubec, A., Niese, S., Rosenthal, M., Gluch, J., Burghammer, M., Gawlitza, P., Keckes, J., Leson, A. Sub 25 nm focusing with a long working distance using multilayer Laue lenses (2018) Journal of Instrumentation, 13 (4), art. no. C04011.

Reisinger, M., Ostermaier, C., Tomberger, M., Zechner, J., Sartory, B., Ecker, W., Daumiller, I., Keckes, J. Matching in-situ and ex-situ recorded stress gradients in an AlxGa1−xN Heterostructure: Complementary wafer curvature analyses in time and space (2018) Scripta Materialia, 147, pp. 50-54.

Todt, J., Keckes, J., Winter, G., Staron, P., Hohenwarter, A. Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction (2018) Scripta Materialia, 146, pp. 178-181.

Korytár, D., Zápražný, Z., Ferrari, C., Frigeri, C., Jergel, M., Matko, I., Kečkeš, J. Cross-sectional TEM study of subsurface damage in SPDT machining of germanium optics (2018) Applied Optics, 57 (8), pp. 1940-1943.

Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G.B., Barthel, E., Doll, G.L., Murray, C.E., Stoessel, C.H., Martinu, L. Review Article: Stress in thin films and coatings: Current status, challenges, and prospects (2018) Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 36 (2), art. no. 020801.

Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M., Czettl, C. Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings (2018) International Journal of Refractory Metals and Hard Materials, 71, pp. 280-284.

Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M., Mitterer, C., Niese, S., Kubec, A. 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film (2018) Acta Materialia, 144, pp. 862-873.

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G., Eckert, J. Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass” [Mater. Sci. Eng.: A 707 (2017) 245–252] Materials Science and Engineering A, 712, p. 819.

Ghosh, P., Kormout, K.S., Todt, J., Lienert, U., Keckes, J., Pippan, R. An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion (2018) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. Article in Press.

Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez-Martin, F., Stark, A., Keckes, J., Kozeschnik, E. Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques (2017) Materials and Design, 136, pp. 214-222.

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G., Eckert, J. Structural modifications in sub-Tg annealed CuZr-based metallic glass (2017) Materials Science and Engineering A, 707, pp. 245-252.

Drexler, A., Ecker, W., Hessert, R., Oberwinkler, B., Gänser, H.-P., Keckes, J., Hofmann, M., Fischersworring-Bunk, A. Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation (2017) AIP Conference Proceedings, 1896, art. no. 070001.

Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J., Lechner, R.T. Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111) (2017) Applied Physics Letters, 111 (16), art. no. 162103.

Hammer, R., Todt, J., Keckes, J., Sartory, B., Parteder, G., Kraft, J., Defregger, S. High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer (2017) Materials and Design, 132, pp. 72-78.

Bian, X.L., Wang, G., Yi, J., Jia, Y.D., Bednarčík, J., Zhai, Q.J., Kaban, I., Sarac, B., Mühlbacher, M., Spieckermann, F., Keckes, J., Eckert, J. Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature (2017) Journal of Alloys and Compounds, 718, pp. 254-259.

Abboud, A., Kirchlechner, C., Keckes, J., Conka Nurdan, T., Send, S., Micha, J.S., Ulrich, O., Hartmann, R., Strüderf, L., Pietsch, U. Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a twodimensional energy-dispersive detector (2017) Journal of Applied Crystallography, 50 (3), pp. 901-908.

Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutná, N., Daniel, R., Pitonak, R., Keckes, J. Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess (2017) Acta Materialia, 131, pp. 391-399.

Paris, O., Lang, D., Li, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Fritz-Popovski, G., Ganser, C., Teichert, C., Clemens, H. Complementary High Spatial Resolution Methods in Materials Science and Engineering (2017) Advanced Engineering Materials, 19 (4), art. no. 1600671.

Souli, I., Terziyska, V.L., Keckes, J., Robl, W., Zechner, J., Mitterer, C., Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers, (2017) Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, 35 (2), art. no. 022201.

Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C.M., Mayrhofer, P.H.,  Thermal expansion of Ti-Al-N and Cr-Al-N coatings, (2017) Scripta Materialia, 127, pp. 182-185.

Köpf, A., Keckes, J., Todt, J., Pitonak, R., Weissenbacher, R., Nanostructured coatings for tooling applications, (2017) International Journal of Refractory Metals and Hard Materials, 62, pp. 219-224.

Kirchlechner, C., Keckes, J., Micha, J.S., Dehm, G. In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples (2017) Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 425-438.

Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M., Mitterer, C., Keckes, J., Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening, (2017) Acta Materialia, 122, pp. 130-137.

Paris, O., Lang, D., Li, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Fritz-Popovski, G., Ganser, C., Teichert, C., Clemens, H. Complementary High Spatial Resolution Methods in Materials Science and Engineering (2017) Advanced Engineering Materials, . Article in Press.

Angerer, P., Schöngrundner, R., Macurova, K., Wiessner, M., Keckes, J. Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures (2016) Powder Diffraction, 31 (4), pp. 267-273.

Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Keckes, J. Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae (2016) Journal of Applied Crystallography, 49 (6), pp. 2217-2225. 

Köpf, A., Keckes, J., Todt, J., Pitonak, R., Weissenbacher, R. Nanostructured CVD coatings and cemented carbides-A perfect match? (2016) World PM 2016 Congress and Exhibition.

Deluca, M., Hammer, R., Keckes, J., Kraft, J., Schrank, F., Todt, J., Robach, O., Micha, J.-S., Defregger, S. Integrated experimental and computational approach for residual stress investigation near through-silicon vias (2016) Journal of Applied Physics, 120 (19), art. no. 195104, .

Bartosik, M., Keckes, J., Persson, P.O.Å., Riedl, H., Mayrhofer, P.H. Interface controlled microstructure evolution in nanolayered thin films (2016) Scripta Materialia, 123, pp. 13-16.

Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J.K., Darbal, A.D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B., Keckes, J. Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction (2016) Materials and Design, 106, pp. 476-481.

Záprazný, Z., Korytár, D., Jergel, M., Šiffalovič, P., Halahovets, Y., Keckes, J., Matko, I., Ferrari, C., Vagovič, P., Mikloška, M. Nano-machining for advanced X-ray crystal optics (2016) AIP Conference Proceedings, 1764, art. no. 020005.

Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C., Gindl-Altmutter, W. Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance, (2016) ACS Applied Materials and Interfaces, 8 (21), pp. 13520-13525.

Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H.C., Keckes, J., Emsenhuber, G., Mahendran, A.R., Liebner, F., Gindl-Altmutter, W., Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid) (2016) Polymers, 8 (6), art. no. 205.

Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C., Keckes, J., Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties (2016) Surface and Coatings Technology, 291, pp. 89-93.

Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., Zimmermann, T., Keckes, J., Veigel, S., Gindl-Altmutter, W., Li, J. Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer (2016) Cellulose, 23 (2), pp. 1189-1197.

Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C., Keckes, J. In-situ Observation of Cross-Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation (2016) Scientific Reports, 6, art. no. 22670. 

Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J., Defregger, S. X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via (2016) Journal of Applied Crystallography, 49, pp. 182-187.

Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C., Mitterer, C. Advanced characterization methods for wear resistant hard coatings: A review on recent progress (2016) Surface and Coatings Technology, 285, pp. 31-46.

Pitonak, R., Köpf, A., Weißenbacher, R., Keckes, J., Tod, J. Novel TiALN coating with special nanostructure, deposited by HR MT-CVD [Neuartige TiALN-Beschichtung mit spezieller nanostruktur, abgeschieden mittels HR MT-CVD] (2016) Keramische Zeitschrift, 68 (2), pp. 111-117.

Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P.H., Keckes, J. Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film (2016) Acta Materialia, 102, pp. 212-219.

Müller, U., Gindl-Altmutter, W., Konnerth, J., Maier, G.A., Keckes, J. Synergy of multi-scale toughening and protective mechanisms at hierarchical branch-stem interfaces (2015) Scientific Reports, 5, art. no. 14522.

Gindl-Altmutter, W., Fürst, C., Mahendran, A.R., Obersriebnig, M., Emsenhuber, G., Kluge, M., Veigel, S., Keckes, J., Liebner, F. Electrically conductive kraft lignin-based carbon filler for polymers (2015) Carbon, 89, pp. 161-168.

Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J., Mitterer, C. Mechanical property enhancement in laminates through control of morphology and crystal orientation (2015) Journal of Physics D: Applied Physics, 48 (29), art. no. 295303.

Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C., Keckes, J. Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization (2015) Journal of Applied Physics, 117 (23), art. no. 235301, .

Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J., Mitterer, C. Resolving depth evolution of microstructure and hardness in sputtered CrN film (2015) Thin Solid Films, 581, pp. 75-79.

Kurz, S.J.B., Meka, S.R., Schell, N., Ecker, W., Keckes, J., Mittemeijer, E.J. Residual stress and microstructure depth gradients in nitrided iron-based alloys revealed by dynamical cross-sectional transmission X-ray microdiffraction (2015) Acta Materialia, 87, pp. 100-110.

Stefenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M., Keckes, J. X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film (2015) Acta Materialia, 85, pp. 24-31.

 Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H., Mayrhofer, P.H. Complementary ab initio and X-ray nanodiffraction studies of Ta2O5 (2015) Acta Materialia, 83, pp. 276-284.

Schratter, S., Keckes, J., Winter, G., Buchmayr, B. Virtual process design for cold formed components (2015) Key Engineering Materials, 651-653, pp. 1279-1284. 

Winter, G., Klarner, J., Buchmayr, B., Keckes, J. Macro- and microscopic properties of gradient ultra-high-strength seamless steel tubes produced by dedicated thermo-mechanical treatments (2015) European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress – Heat Treatment and Surface Engineering from Tradition to Innovation.

Winter, G., Klarner, J., Staron, P., Buchmayr, B., Keckes, J. Experimental characterization and modeling of residual stress gradients across straight and bent seamless steel tubes (2015) Key Engineering Materials, 651-653, pp. 231-236.

Köpf, A., Keckes, J., Todt, J., Pitonak, R., Weissenbacher, R. Nanostructured coatings for tooling applications (2015) Materials Science Forum, 825-826, pp. 597-604.

Bartosik, M., Arndt, M., Rachbauer, R., Krywka, C., Koller, C.M., Keckes, J., Mayrhofer, P.H. Cross-sectional X-ray nano-diffraction and -reflectivity analysis of multilayered AlTiN-TiSiN thin films: Correlation between residual strain and bi-layer period (2015) Scripta Materialia, 107, pp. 153-156.

Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J., Buchmayr, B. Experimental characterization and modelling of triaxial residual stresses in straightened railway rails (2015) Journal of Strain Analysis for Engineering Design, 50 (3), pp. 190-198.

Mühlbacher, M., Mendez-Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L., Mitterer, C. Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography (2015) Thin Solid Films, 574, pp. 103-109.

Benediktovitch, A., Ulyanenkova, T., Keckes, J., Ulyanenkov, A. Sample tilt-free characterization of residual stress gradients in thin coatings using an in-plane arm-equipped laboratory X-ray diffractometer (2014) Journal of Applied Crystallography, 47 (6), pp. 1931-1938.

Holec, D., Tasnádi, F., Wagner, P., Friák, M., Neugebauer, J., Mayrhofer, P.H., Keckes, J. Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions (2014) Physical Review B – Condensed Matter and Materials Physics, 90 (18), art. no. 184106.

Abboud, A., Kirchlechner, C., Send, S., Micha, J.S., Ulrich, O., Pashniak, N., Strüder, L., Keckes, J., Pietsch, U. A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device (2014) Review of Scientific Instruments, 85 (11), art. no. 113901.

Vaxelaire, N., Labat, S., Cornelius, T.W., Kirchlechner, C., Keckes, J., Schulli, T., Thomas, O. New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction (2014) Acta Materialia, 78, pp. 46-55.

Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C., Keckes, J. Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution (2014) Journal of Applied Physics, 115 (20), art. no. 203507.

Gindl-Altmutter, W., Eichhorn, S.J., Burghammer, M., Keckes, J. Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering (2014) Cellulose, 21 (1), pp. 845-851.

Bachmaier, A., Keckes, J., Kormout, K.S., Pippan, R. Supersaturation in Ag-Ni alloy by two-step high-pressure torsion processing (2014) Philosophical Magazine Letters, 94 (1), pp. 9-17.

Benediktovitch, A., Ulyanenkova, T., Keckes, J., Ulyanenkov, A. Stress gradient analysis by noncomplanar X-ray diffraction and corresponding refraction correction (2014) Advanced Materials Research, 996, pp. 162-168.

Hofer, A.M., Schlacher, J., Keckes, J., Winkler, J., Mitterer, C. Sputtered molybdenum films: Structure and property evolution with film hickness (2014) Vacuum, 99, pp. 149-152.

Henniges, U., Veigel, S., Lems, E.-M., Bauer, A., Keckes, J., Pinkl, S., Gindl-Altmutter, W. Microfibrillated cellulose and cellulose nanopaper from Miscanthus biogas production residue(2014) Cellulose, 21 (3), pp. 1601-1610.

Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C., Keckes, J. Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending (2014) Materials Science Forum, 768-769, pp. 272-279.

Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C., Mitterer, C. Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction (2014) Surface and Coatings Technology, 258, pp. 121-126.

Teppernegg, T., Klünsner, T., Angerer, P., Tritremmel, C., Czettl, C., Keckes, J., Ebner, R., Pippan, R. Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life (2014) International Journal of Refractory Metals and Hard Materials, 47, pp. 80-85.

Teppernegg, T., Klünsner, T., Angerer, P., Tritremmel, C., Ebner, R., Czettl, C., Keckes, J., Pippan, R. Residual stress and damage in coated hard metal milling inserts (2014) Advances in Tungsten, Refractory and Hardmaterials IX – Proceedings of the 9th International Conference on Tungsten, Refractory and Hardmaterials, pp. 245-253.

Riedl, A., Daniel, R., Todt, J., Stefenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C., Keckes, J. A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings (2014) Surface and Coatings Technology, 257, pp. 108-113.

Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T., Keckes, J. Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD, (2014) Surface and Coatings Technology, 258, pp. 1119-1127.

Staron, P., Fischer, T., Keckes, J., Schratter, S., Hatzenbichler, T., Schell, N., Müller, M., Schreyer, A. Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell (2014) Materials Science Forum, 768-769, pp. 72-75.  

Defregger, S., Steffenelli, M., Deluca, M., Maier, G., Sartory, B., Burghammer, M., Kraft, J., Carniello, S., Keckes, J. Local residual stresses in tungsten coated TSVs characterized by synchrotron X-ray nanodiffraction and Raman spectroscopy (2014) Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014, art. no. 6962836, .

Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J.Buchmayr, B. Triaxial residual stresses in thermomechanically rolled seamless tubes characterized by high-energy synchrotron x-ray diffraction (2013) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 3.

Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Koepf, A., Weißenbacher, R., Pitonak, R. Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films (2013) Thin Solid Films, 545, pp. 29-32.

Stefenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M., Keckes, J. X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: A critical comparison (2013) Journal of Applied Crystallography, 46 (5), pp. 1378-1385.

Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P.H., Keckes, J. Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film (2013) Thin Solid Films, 542, pp. 1-4.

Daniel, R., Keckes, J., Matko, I., Burghammer, M., Mitterer, C. Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization (2013) Acta Materialia, 61 (16), pp. 6255-6266.

Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J., Mayrhofer, P.H. Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings (2013) Scripta Materialia, 68 (12), pp. 917-920.

Krywka, C., Keckes, J., Storm, S., Buffet, A., Roth, S.V., Döhrmann, R., Müller, M. Nanodiffraction at MINAXS (P03) beamline of PETRA III (2013) Journal of Physics: Conference Series, 425 (PART 7), art. no. 072021.

Schlögl, M., Paulitsch, J., Keckes, J., Mayrhofer, P.H. Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings (2013) Thin Solid Films, 531, pp. 113-118.

Popov, M.N., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C., Draxl, C. TiO 2(100)/Al 2O 3(0001) interface: A first-principles study supported by experiment (2012) Physical Review B – Condensed Matter and Materials Physics, 86 (20), art. no. 205309.

Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S., Burghammer, M. X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films (2012) Scripta Materialia, 67 (9), pp. 748-751.

Riedl, A., Daniel, R., Stefenelli, M., Schöberl, T., Kolednik, O., Mitterer, C., Keckes, J. A novel approach for determining fracture toughness of hard coatings on the micrometer scale (2012) Scripta Materialia, 67 (7-8), pp. 708-711.

Schalk, N., Mitterer, C., Keckes, J., Penoy, M., Michotte, C. Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings (2012) Surface and Coatings Technology, 209, pp. 190-196.

Kirchlechner, C., Grosinger, W., Kapp, M.W., Imrich, P.J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G., Motz, C. Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray μlaue diffraction (2012) Philosophical Magazine, 92 (25-27), pp. 3231-3242.

Gindl-Altmutter, W., Veigel, S., Obersriebnig, M., Tippelreither, C., Keckes, J. High-modulus oriented cellulose nanopaper (2012) ACS Symposium Series, 1107, pp. 3-16.

Gindl-Altmutter, W., Keckes, J., Plackner, J., Liebner, F., Englund, K., Laborie, M.-P. All-cellulose composites prepared from flax and lyocell fibres compared to epoxy-matrix composites (2012) Composites Science and Technology, 72 (11), pp. 1304-1309.

Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Stefenelli, M., Klaus, M., Genzel, C., Mitterer, C., Keckes, J. Lateral gradients of phases, residual stress and hardness in a laser heated Ti 0.52Al 0.48N coating on hard metal (2012) Surface and Coatings Technology, 206 (22), pp. 4502-4510.

Hostert, C., Music, D., Bednarcik, J., Keckes, J., Schneider, J.M. Quantum mechanically guided design of Co 43Fe 20Ta 5.5X 31.5 (X=B, Si, P, S) metallic glasses (2012) Journal of Physics Condensed Matter, 24 (17), art. no. 175402.

Gindl-Altmutter, W., Keckes, J. The structure and mechanical properties of spines from the cactus Opuntia ficus-indica (2012) BioResources, 7 (1), pp. 1232-137.

Krywka, C., Neubauer, H., Priebe, M., Salditt, T., Keckes, J., Buffet, A., Roth, S.V., Doehrmann, R., Mueller, M. A two-dimensional waveguide beam for X-ray nanodiffraction (2012) Journal of Applied Crystallography, 45 (1), pp. 85-92.

Kirchlechner, C., Imrich, P.J., Grosinger, W., Kapp, M.W., Keckes, J., Micha, J.S., Ulrich, O., Thomas, O., Labat, S., Motz, C., Dehm, G. Expected and unexpected plastic behavior at the micron scale: An in situ μlaue tensile study (2012) Acta Materialia, 60 (3), pp. 1252-1258.

Hostert, C., Music, D., Bednarcik, J., Keckes, J., Kapaklis, V., Hjörvarsson, B., Schneider, J.M. Abinitio molecular dynamics model for density, elastic properties and short range order of Co-Fe-Ta-B metallic glass thin films (2011) Journal of Physics Condensed Matter, 23 (47), art. no. 475401.

Veigel, S., Müller, U., Keckes, J., Obersriebnig, M., Gindl-Altmutter, W. Cellulose nanofibrils as filler for adhesives: Effect on specific fracture energy of solid wood-adhesive bonds (2011) Cellulose, 18 (5), pp. 1227-1237.

Daniel, R., Holec, D., Bartosik, M., Keckes, J., Mitterer, C. Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model (2011) Acta Materialia, 59 (17), pp. 6631-6645.

Kirchlechner, C., Keckes, J., Micha, J.-S., Dehm, G. In situ μlaue: Instrumental setup for the deformation of micron sized samples (2011) Advanced Engineering Materials, 13 (8), pp. 837-844.

Bartosik, M., Pitonak, R., Keckes, J. In situ high temperature X-ray diffraction reveals residual stress depth-profiles in blasted TiN hard coatings (2011) Advanced Engineering Materials, 13 (8), pp. 705-711.

Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M.W., Micha, J.S., Ulrich, O., Dehm, G. Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars (2011) Acta Materialia, 59 (14), pp. 5618-5626.

Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H., Mayrhofer, P.H. Decomposition pathways in age hardening of Ti-Al-N films (2011) Journal of Applied Physics, 110 (2), art. no. 023515.

Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G., Keckes, J. Dislocation storage in single slip-oriented Cu micro-tensile samples: New insights via X-ray microdiffraction (2011) Philosophical Magazine, 91 (7-9), pp. 1256-1264.

Siffalovic, P., Jergel, M., Chitu, L., Majkova, E., Matko, I., Luby, S., Timmann, A., Roth, S.V., Keckes, J., Maier, G.A., Hembd, A., Hertlein, F., Wiesmann, J. Interface study of a high-performance W/B4C X-ray mirror (2010) Journal of Applied Crystallography, 43 (6), pp. 1431-1439.

Bartosik, M., Daniel, R., Mitterer, C., Keckes, J. Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses (2010) Surface and Coatings Technology, 205 (5), pp. 1320-1323.

Siffalovic, P., Chitu, L., Vegso, K., Majkova, E., Jergel, M., Weis, M., Luby, S., Capek, I., Keckes, J., Maier, G.A., Satka, A., Perlich, J., Roth, S.V. Towards strain gauges based on a self-assembled nanoparticle monolayer – SAXS study (2010) Nanotechnology, 21 (38), art. no. 385702, .

Gindl, W., Emsenhuber, G., Plackner, J., Konnerth, J., Keckes, J. Converse piezoelectric effect in cellulose i revealed by wide-angle x-ray diffraction (2010) Biomacromolecules, 11 (5), pp. 1281-1285.

Kirchlechner, C., Martinschitz, K.J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C., Keckes, J. X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel (2010) Scripta Materialia, 62 (10), pp. 774-777.

Siffalovic, P., Chitu, L., Majkova, E., Vegso, K., Jergel, M., Luby, S., Capek, I., Satka, A., Maier, G.A., Keckes, J., Timmann, A., Roth, S.V. Kinetics of nanoparticle reassembly mediated by UV-photolysis of surfactant (2010) Langmuir, 26 (8), pp. 5451-5455.

Daniel, R., Martinschitz, K.J., Keckes, J., Mitterer, C. The origin of stresses in magnetron-sputtered thin films with zone T structures (2010) Acta Materialia, 58 (7), pp. 2621-2633.

Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jacques, V., Forest, S., Thomas, O. Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction (2010) New Journal of Physics, 12, art. no. 035018, .

Kirchlechner, C., Martinschitz, K.J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C., Keckes, J. Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction (2010) Thin Solid Films, 518 (8), pp. 2090-2096.

Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jacques, V., Picca, F., Ravy, S., Kirchlechner, C., Keckes, J. 3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology (2010) Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 268 (3-4), pp. 388-393.

Siffalovic, P., Vegso, K., Jergel, M., Majkova, E., Keckes, J., Maier, G., Cornejo, M., Ziberi, B., Frost, F., Hasse, B., Wiesmann, J. Measurement of nanopatterned surfaces by real and reciprocal space techniques (2010) Measurement Science Review, 10 (5), pp. 153-156.

Chitu, L., Siffalovic, P., Majkova, E., Jergel, M., Vegso, K., Luby, S., Capek, I., Satka, A., Perlich, J., Timmann, A., Roth, S., Keckes, J., Maier, G. Modified Langmuir-Blodgett deposition of nanoparticles – Measurement of 2D to 3D ordered arrays (2010) Measurement Science Review, 10 (5), pp. 162-165.

Eichhorn, S.J., Dufresne, A., Aranguren, M., Marcovich, N.E., Capadona, J.R., Rowan, S.J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Keckes, J., Yano, H., Abe, K., Nogi, M., Nakagaito, A.N., Mangalam, A., Simonsen, J., Benight, A.S., Bismarck, A., Berglund, L.A., Peijs, T. Review: Current international research into cellulose nanofibres and nanocomposites (2010) Journal of Materials Science, 45 (1), pp. 1-33.   

Köstenbauer, H., Hofer, A.M., Fontalvo, G.A., Keckes, J., Mitterer, C. Structure, stresses and stress relaxation of TiN/Cu multilayer and nanocomposite coatings (2009) International Journal of Materials Research, 100 (8), pp. 1114-1118.  

Martinschitz, K.J., Daniel, R., Mitterer, Ch., Keckes, J. Novel technique to determine elastic constants of thin films (2009) Materials Research Society Symposium Proceedings, 1139, pp. 115-120.

Siffalovic, P., Majkova, E., Chitu, L., Jergel, M., Luby, S., Keckes, J., Maier, G., Timmann, A., Roth, S.V., Tsuru, T., Harada, T., Yamamoto, M., Heinzmann, U. Characterization of Mo/Si soft X-ray multilayer mirrors by grazing-incidence small-angle X-ray scattering (2009) Vacuum, 84 (1), pp. 19-25.  

Konnerth, J., Gierlinger, N., Keckes, J., Gindl, W. Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle (2009) Journal of Materials Science, 44 (16), pp. 4399-4406.

Majkova, E., Siffalovic, P., Chitu, L., Jergel, M., Luby, S., Timmann, A., Roth, S.V., Satka, A., Keckes, J., Maier, G.A. Real-time tracking of nanoparticle self-assembling using GISAXS (2009) Superlattices and Microstructures, 46 (1-2), pp. 286-290.

Martinschitz, K.J., Daniel, R., Mitterer, C., Keckes, J. Elastic constants of fibre-textured thin films determined by X-ray diffraction (2009) Journal of Applied Crystallography, 42 (3), pp. 416-428.  

Kostenbauer, H., Fontalvo, G.A., Mitterer, C., Hlawacek, G., Teichert, C., Keckes, J. Structure, stresses and stress relaxation of TiN/Ag nanocomposite films (2009) Journal of Nanoscience and Nanotechnology, 9 (6), pp. 3606-3610.

Gindl, W., Emsenhuber, G., Maier, G., Keckes, J. Cellulose in never-dried gel oriented by an AC electric field (2009) Biomacromolecules, 10 (5), pp. 1315-1318.  

Daniel, R., Martinschitz, K.J., Keckes, J., Mitterer, C. Texture development in polycrystalline CrN coatings: The role of growth conditions and a Cr interlayer (2009) Journal of Physics D: Applied Physics, 42 (7), art. no. 075401.

Adusumalli, R.-B., Keckes, J., Martinschitz, K.J., Boesecke, P., Weber, H., Roeder, T., Sixta, H., Gindl, W. Comparison of molecular orientation and mechanical properties of lyocell fibre tow and staple fibres (2009) Cellulose, 16 (5), pp. 765-772.

Massl, S., Thomma, W., Keckes, J., Pippan, R. Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique (2009) Acta Materialia, 57 (6), pp. 1768-1776.

Kirchlechner, C., Martinschitz, K.J., Daniel, R., Mitterer, C., Keckes, J. Residual stresses in thermally cycled CrN coatings on steel (2008) Thin Solid Films, 517 (3), pp. 1167-1171.  

Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M., Dehm, G. Precipitation processes in a Mg-Zn-Sn alloy studied by TEM and SAXS (2008) Materials Science and Engineering A, 494 (1-2), pp. 158-165.

Massl, S., Köstenbauer, H., Keckes, J., Pippan, R. Stress measurement in thin films with the ion beam layer removal method: Influence of experimental errors and parameters (2008) Thin Solid Films, 516 (23), pp. 8655-8662.

Massl, S., Keckes, J., Pippan, R. A new cantilever technique reveals spatial distributions of residual stresses in near-surface structures (2008) Scripta Materialia, 59 (5), pp. 503-506.  

Massl, S., Keckes, J., Pippan, R. A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale? Mechanics of residually stressed systems (2008) Materials Research Society Symposium Proceedings, 1052, pp. 87-92.

Burgert, I., Keckes, J., Fratzl, P. Mechanics of the Wood Cell Wall (2008) Characterization of the Cellulosic Cell Wall, pp. 30-37.

Köstenbauer, H., Fontalvo, G.A., Mitterer, C., Keckes, J. Tribological properties of TiN/Ag nanocomposite coatings (2008) Tribology Letters, 30 (1), pp. 53-60.

Köstenbauer, H., Fontalvo, G.A., Keckes, J., Mitterer, C. Intrinsic stresses and stress relaxation in TiN/Ag multilayer coatings during thermal cycling (2008) Thin Solid Films, 516 (8), pp. 1920-1924.

Martinschitz, K.J., Daniel, R., Mitterer, C., Keckes, J. Stress evolution in CrN/Cr coating systems during thermal straining (2008) Thin Solid Films, 516 (8), pp. 1972-1976.

Gindl, W., Reifferscheid, M., Martinschitz, K.J., Boesecke, P., Keckes, J. Reorientation of crystalline and noncrystalline regions in regenerated cellulose fibers and films tested in uniaxial tension (2008) Journal of Polymer Science, Part B: Polymer Physics, 46 (3), pp. 297-304.

Martinschitz, K.J., Boesecke, P., Garvey, C.J., Gindl, W., Keckes, J. Changes in microfibril angle in cyclically deformed dry coir fibers studied by in-situ synchrotron X-ray diffraction (2008) Journal of Materials Science, 43 (1), pp. 350-356.

Maier, G.A., Keckes, J., Brechbuehl, J., Guerault, H., Bermejo, R. Position resolved residual stress determination in Alumina-zirconia multilayered ceramics (2008) Materials Science Forum, 571-572, pp. 421-425.

Martinschitz, K.J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C., Keckes, J. Temperature dependence of residual stress gradients in shot-peened steel coated with CrN (2008) Materials Science Forum, 571-572, pp. 101-106.

Leitner, J., Hinterstoisser, B., Wastyn, M., Keckes, J., Gindl, W. Sugar beet cellulose nanofibril-reinforced composites (2007) Cellulose, 14 (5), pp. 419-425.

Massl, S., Keckes, J., Pippan, R. A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale (2007) Acta Materialia, 55 (14), pp. 4835-4844.

Keckes, J., Eiper, E., Martinschitz, K.J., Köstenbauer, H., Daniel, R., Mitterer, C. High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method (2007) Review of Scientific Instruments, 78 (3), art. no. 036103.

Eiper, E., Keckes, J., Martinschitz, K.J., Zizak, I., Cabié, M., Dehm, G. Size-independent stresses in Al thin films thermally strained down to -100 °C (2007) Acta Materialia, 55 (6), pp. 1941-1946.

Maier, G.A., Wallner, G.M., Lang, R.W., Keckes, J., Amenitsch, H., Fratzl, P. Fracture of poly(vinylidene fluoride): A combined synchrotron and laboratory in-situ X-ray scattering study (2007) Journal of Applied Crystallography, 40 (SUPPL. 1) .

 Gindl, W., Keckes, J. Drawing of self-reinforced cellulose films (2007) Journal of Applied Polymer Science, 103 (4), pp. 2703-2708.

Köstenbauer, H., Fontalvo, G.A., Kapp, M., Keckes, J., Mitterer, C. Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density (2007) Surface and Coatings Technology, 201 (8), pp. 4777-4780.

Balog, M., Kečkéš, J., Schöberl, T., Galusek, D., Hofer, F., Křesťan, J., Lenčéš, Z., Huang, J.-L., Šajgalík, P. Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nano-particles (2007) Journal of the European Ceramic Society, 27 (5), pp. 2145-2152.

Martinschitz, K.J., Eiper, E., Keckes, J. Stress factors and absolute residual stresses in thin films determined by the combination of curvature and sin2ψ methods (2006) Materials Science Forum, 524-525, pp. 711-715.

Hafok, M., Vorhauer, A., Keckes, J., Pippan, R. HPT-deformation of copper and nickel single crystals (2006) Materials Science Forum, 503-504, pp. 621-626.

Gindl, W., Martinschitz, K.J., Boesecke, P., Keckes, J. Orientation of cellulose crystallites in regenerated cellulose fibres under tensile and bending loads (2006) Cellulose, 13 (6), pp. 621-627.

Gindl, W., Martinschitz, K.J., Boesecke, P., Keckes, J. Structural changes during tensile testing of an all-cellulose composite by in situ synchrotron X-ray diffraction (2006) Composites Science and Technology, 66 (15), pp. 2639-2647.

Martinschitz, K.J., Eiper, E., Massl, S., Köstenbauer, H., Daniel, R., Fontalvo, G., Mitterer, C., Keckes, J. Rapid determination of stress factors and absolute residual stresses in thin films (2006) Journal of Applied Crystallography, 39 (6), pp. 777-783.

Gindl, W., Martinschitz, K.J., Boesecke, P., Keckes, J. Changes in the molecular orientation and tensile properties of uniaxially drawn cellulose films (2006) Biomacromolecules, 7 (11), pp. 3146-3150.

Garvey, C.J., Keckes, J., Parker, I., Beilby, M., Lee, G.S.H. Polymer nanoscale morphology in Chara australis Brown cell walls studied by advanced solid state techniques (2006) Cryptogamie, Algologie, 27 (4), pp. 391-401.

Keckes, J., Eiper, E., Martinschitz, K.J., Boesecke, P., Gindl, W., Dehm, G. In-situ X-ray diffraction as a tool to probe mechanical phenomena down to the nano-scale (2006) Advanced Engineering Materials, 8 (11), pp. 1084-1088.

Gindl, W., Keckes, J. Strain hardening in regenerated cellulose fibres (2006) Composites Science and Technology, 66 (13), pp. 2049-2053.

Schmidegg, K., Sun, L.D., Maier, G.A., Keckes, J., Zeppenfeld, P. Characterization of optical anisotropy in oriented poly(ethylene terephthalate) films using reflectance difference spectroscopy (2006) Polymer, 47 (13), pp. 4768-4772.

Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Eiper, E., Keckes, J. Modification of wetting of copper (Cu) on carbon (C) by plasma treatment and molybdenum (Mo) interlayers (2006) Applied Surface Science, 252 (15), pp. 5343-5346.

Gindl, W., Schöberl, T., Keckes, J. Structure and properties of a pulp fibre-reinforced composite with regenerated cellulose matrix (2006) Applied Physics A: Materials Science and Processing, 83 (1), pp. 19-22.

Eiper, E., Martinschitz, K.J., Keckes, J. Combined elastic strain and macroscopic stress characterization in polycrystalline Cu thin films (2006) Powder Diffraction, 21 (1), pp. 25-29.

Balog, M., Šajgalíkl, P., Lenčéš, Z., Hnatko, M., Kečkéš, J. Hardness limits of SiC and Si3N4 ceramic materials (2005) Key Engineering Materials, 287, pp. 311-316.

Balog, M., Šajgalík, P., Lenčéš, Z., Hnatko, M., Kečkéš, J., Huang, J.-L., Janega, J., Horváthová, R. Nano-indentation of SIC and Si3N4/SiC ceramic materials(2005) Key Engineering Materials, 290, pp. 272-275.

Gindl, W., Keckes, J. All-cellulose nanocomposite (2005) Polymer, 46 (23), pp. 10221-10225.

Eiper, E., Hofmann, A., Gerlach, J.W., Rauschenbach, B., Keckes, J. Anisotropic intrinsic and extrinsic stresses in epitaxial wurtzitic GaN thin film on γ-LiAlO2 (1 0 0) (2005) Journal of Crystal Growth, 284 (3-4), pp. 561-566.

Eiper, E., Martinschitz, K.J., Gerlach, J.W., Lackner, J.M., Zizak, I., Darowski, N., Keckes, J. X-ray elastic constants determined by the combination of sin2 ψ and substrate-curvature methods (2005) Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 96 (9), pp. 1069-1073.

 Burgert, I., Eder, M., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S. Properties of chemically and mechanically isolated fibres of spruce (Picea abies wL.x Karst.). Part 3: Mechanical characterization (2005) Holzforschung, 59 (3), pp. 354-357.

Keckes, J. Simultaneous determination of experimental elastic and thermal strains in thin films (2005) Journal of Applied Crystallography, 38 (2), pp. 311-318.

Balog, M., Šajgalík, P., Hnatko, M., Lenčéš, Z., Monteverde, F., Kečkéš, J., Huang, J.-L. Nano- versus macro-hardness of liquid phase sintered SiC (2005) Journal of the European Ceramic Society, 25 (4), pp. 529-534.

Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S. Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 2: Twisting phenomena (2005) Holzforschung, 59 (2), pp. 247-251.

Keckes, J., Hafok, M., Eiper, E., Hofer, A., Resel, R., Eisenmenger-Sittner, C. Evaluation of experimental stress-strain dependence in thermally cycled Al thin film on Si(100) (2004) Powder Diffraction, 19 (4), pp. 367-371.

Gindl, W., Keckes, J. Tensile properties of cellulose acetate butyrate composites reinforced with bacterial cellulose (2004) Composites Science and Technology, 64 (15 SPEC. ISS.), pp. 2407-2413.

Fratzl, P., Burgert, I., Keckes, J. Mechanical model for the deformation of the wood cell wall (2004) Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 95 (7), pp. 579-584.  

Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S. Structure-function relationships of four compression wood types: Micromechanical properties at the tissue and fibre level (2004) Trees – Structure and Function, 18 (4), pp. 480-485.

Sarén, M.-P., Serimaa, R., Andersson, S., Saranpää, P., Keckes, J., Fratzl, P. Effect of growth rate on mean microfibril angle and cross-sectional shape of tracheids of Norway spruce (2004) Trees – Structure and Function, 18 (3), pp. 354-362.

Eiper, E., Resel, R., Eisenmenger-Sittner, C., Hafok, M., Keckes, J. Thermally-induced stresses in thin aluminum layers grown on silicon (2004) Powder Diffraction, 19 (1), pp. 74-76.  

Erlacher, K., Görgl, R., Keckes, J., Jakob, H., Bruegemann, L., Doppler, P., Bergmann, A., Leitner, H., Marsoner, S., Fratzl, P. Small Angle X-Ray Scattering with Cobalt Radiation for Nanostructure Characterization of Fe-Based Specimen (2004) Materials Science Forum, 443-444, pp. 155-158.

Keckes, J., Six, S., Gerlach, J.W., Rauschenbach, B. Temperature dependence of in-plane stresses in sublayers of Al/AlN/Al 2O3(0 0 0 1) structure (2004) Journal of Crystal Growth, 262 (1-4), pp. 119-123.

Lackner, J.M., Waldhauser, W., Ebner, R., Keckés, J., Schöberl, T. Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications (2004) Surface and Coatings Technology, 177-178, pp. 447-452.

Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S.E. Microtensile Testing of Wood Fibers Combined with Video Extensometry for Efficient Strain Detection (2003) Holzforschung, 57 (6), pp. 661-664.

Keckes, J., Wenzel, A., Gerlach, J.W., Rauschenbach, B. Annealing of the radiation damage in Mg-implanted GaN thin films: Temperature development of lattice parameters and stresses (2003) Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 211 (4), pp. 519-523.

Balog, M., Šajgalík, P., Lenčéš, Z., Kečkéš, J., Huang, J.-L. Liquid phase sintering of SiC with AIN and rare-earth oxide additives (2003) Ceramic Transactions, 142, pp. 191-202.

Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S.V., Stanzl-Tschegg, S., Fratzl, P. Cell-wall recovery after irreversible deformation of wood (2003) Nature Materials, 2 (12), pp. 810-814.

Kraus, T., Keckes, J., Lindner, J.K.N., Ensinger, W., Stritzker, B. Coating the Inner Walls of Tubes with TiN Films by Reactive Sputtering (2003) AIP Conference Proceedings, 680, pp. 830-834.

Resel, R., Tamas, E., Sonderegger, B., Hofbauer, P., Keckes, J. A heating stage up to 1173 K for X-ray diffraction studies in the whole orientation space (2003) Journal of Applied Crystallography, 36 (1), pp. 80-85.

Keckes, J. Evaluation of growth and thermal strains/stresses in epitaxial thin films using x-ray diffraction (2002) Materials Science Forum, 404-407, pp. 697-702.

Keckes, J., Koblmueller, G., Averbeck, R. Temperature dependence of stresses in GaN/AlN/6H-SiC(0 0 0 1) structures: Correlation between AlN buffer thickness and intrinsic stresses in GaN (2002) Journal of Crystal Growth, 246 (1-2), pp. 73-77.

Heiml, O., Gritzner, G., Tönies, S., Weber, H.W., Kečkéš, J., Ortner, B. (Tl0.5Pb0.5)(Sr0.8 Ba0.2)2 Ca2Cu3Oy superconducting thick films with high in-field critical current densities (2002) Superconductor Science and Technology, 15 (11), pp. 1592-1595.

Madejová, J., Kečkéš, J., Pálková, H., Komadel, P. Identification of components in smectite/kaolinite mixtures (2002) Clay Minerals, 37 (2), pp. 377-388.

Keckes, J., Six, S., Tesch, W., Resel, R., Rauschenbach, B. Evaluation of thermal and growth stresses in heteroepitaxial AlN thin films formed on (0 0 0 1) sapphire by pulsed laser ablation (2002) Journal of Crystal Growth, 240 (1-2), pp. 80-86.  

Burgert, I., Keckes, J., Frühmann, K., Fratzl, P., Tschegg, S.E. A comparison of two techniques for wood fibre isolation – Evaluation by tensile tests on single fibres with different microfibril angle (2002) Plant Biology, 4 (1), pp. 9-12.

Puxkandl, R., Zizak, I., Paris, O., Keckes, J., Tesch, W., Bernstorff, S., Purslow, P., Fratzl, P. Viscoelastic properties of collagen: Synchrotron radiation investigations and structural model (2002) Philosophical Transactions of the Royal Society B: Biological Sciences, 357 (1418), pp. 191-197.

Keckes, J., Gerlach, J.W., Averbeck, R., Riechert, H., Bader, S., Hahn, B., Lugauer, H.-J., Lell, A., Härle, V., Wenzel, A., Rauschenbach, B. Temperature dependence of stresses in GaN thin films grown on (0001) sapphire: Modeling of thermal stresses (2001) Applied Physics Letters, 79 (26), pp. 4307-4309.

Plank, H., Resel, R., Purger, S., Keckes, J., Thierry, A., Lotz, B., Andreev, A., Sariciftci, N.S., Sitter, H. Heteroepitaxial growth of self-assembled highly ordered para-sexiphenyl films: A crystallographic study (2001) Physical Review B – Condensed Matter and Materials Physics, 64 (23), art. no. 235423, pp. 2354231-2354235.

Resel, R., Plank, H., Pogantsch, A., Leising, G., Keckes, J. Twinning effects in polycrystalline hexaphenyl thin films (2001) Synthetic Metals, 121 (1-3), pp. 1361-1362.  

Ortner, B., Keckes, J. How to choose sample orientations in full strain/stress tensor determination with a time-of-flight goniometer (2001) Journal of Neutron Research, 9 (2-4), pp. 201-205.

Keckes, J., Gerlach, J.W., Rauschenbach, B. Residual stresses in cubic and hexagonal GaN grown on sapphire using ion beam-assisted deposition (2000) Journal of Crystal Growth, 219 (1-2), pp. 1-9.

Erlacher, K., Resel, R., Keckes, J., Leising, G. Highly oriented layers of hexaphenyl thin films for application in light emitting diodes (2000) Materials Science Forum, 321.  

Resel, R., Ottmar, M., Hanack, M., Keckes, J., Leising, G. Preferred orientation of copper phthalocyanine thin films evaporated on amorphous substrates (2000) Journal of Materials Research, 15 (4), pp. 934-939.

Brandt, H.-J., Resel, R., Keckes, J., Koppelhuber-Bitschnau, B., Koch, N., Leising, G. Determination of crystallite size and lattice strain in hexaphenyl thin films by line profile analysis (1999) Materials Research Society Symposium – Proceedings, 561, pp. 161-166.

Erlacher, K., Resel, R., Keckes, J., Meghdadi, F., Leising, G. Structural properties of hexaphenyl thin films obtained by a rubbing technique: characterization of a biaxial texture (1999) Journal of Crystal Growth, 206 (1-2), pp. 135-140.

Kečkéš, J., Ortner, B., Jakabovič, J., Kováć, J. Orientation relationship between indium films and GaSb(1 1 1)B: Annealing-induced transformation of fibre texture into heteroepitaxy (1998) Journal of Crystal Growth, 192 (1-2), pp. 84-88.

Kečkéš, J., Ortner, B., Jakabovič, J., Kováč, J. Structural analysis of annealed Al/n-InP(100) interfaces: Different types of indium heteroepitaxial growth on InP(111)A and InP(111)B planes (1998) Journal of Applied Physics, 84 (2), pp. 751-755.

Kečkéš, J., Ortner, B., Németh, Š., Grietens, B., Borghs, G. Texture analysis of indium films grown on GaAs(100) by molecular beam epitaxy (1997) Applied Physics Letters, 71 (17), pp. 2460-2462.

Kečkéš, J., Ortner, B., Červeň, I., Jakabovič, J., Kováč, J. Thermal degradation of ZnO/InP interfaces: Heteroepitaxial growth of precipitated indium on InP{111} planes (1996) Journal of Applied Physics, 80 (11), pp. 6204-6210.

Kečkéš, J., Ortner, B., Červeń, I., Jakabovič, J., Kováč, J., Srnánek, R., Novotný, I., Tvarožek, V. Epitaxial character of in growth at annealed ZnO/InP(110) interfaces (1996) Physica Status Solidi (A) Applied Research, 153 (2), pp. 389-394.

Kečkéš, J., Ortner, B., Červeň, I., Kováč, J. The orientations of In crystallites formed at annealed ZnO InP interfaces (1995) Journal of Crystal Growth, 156 (1-2), pp. 17-22.